Comments on: ATI Radeon Mobility X1300 Video Chip & Windows 7 Drivers

By: doug

doug — Tue, 17 Jan 2012 18:10:33 +0000

http://www.visiontek.com/support/downloads/drivers.html

amd is not the only one with drivers since it is a visiontek card.

windows 7 is supported here

By: hsegars

hsegars — Sun, 04 Jul 2010 00:46:41 +0000

Eric:

I sent you a PM with a screen shot but I am getting 1680 x 1050 on my laptop.

By: Eric

Eric — Sat, 03 Jul 2010 16:02:01 +0000

Herb, what resolution did you finally end up with? The highest I can get with my X1300 on my Inspiron 6400 is 1280 x 800 with a 60 hertz refresh rate. This is both utilizing the drivers that now update with a fresh install of Win 7 (the ATI drivers are now included in Windows Update) and I also tried the Modder approach with ver 10 and a ver 8 of the ATI Catalyst drivers. All produced the same result except, of course, with the Modder approach I ended up with Catalyst control panel.

FOR THE INDIVIDUAL WITH THE BASE SYSTEM DEVICE errors above, you need to download the Ricoh driver under the Chipset folder from the Dell website – R5C832 – http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=INSPIRONI6400/E1505&os=WW1&osl=en&catid=&impid=

By: El-Tiernito

El-Tiernito — Wed, 02 Jun 2010 03:22:41 +0000

Try this website! Good luck!

http://downloads.guru3d.com/downloadget.php?id=2144&file=4&evp=3e5cd5fca1c9137290532521cbea5d8d

By: Herb Segars

Herb Segars — Fri, 19 Feb 2010 20:14:01 +0000

Simon:

I have not had any problems with my system since I installed the fix.

By: Simon Turner

Simon Turner — Fri, 19 Feb 2010 16:51:02 +0000

These instruction saved me! Thanks a lot.

I installed Windows 7 (32 bit) from CD on Dell Inspiron 6400 whilst in Windows XP and got into a continuous reboot loop. The only way out of it I could find was to disable all drives but my CD drive, boot directly from the Windows 7 install CD and then install from there. After this I had a working computer but with a reduced screen resolution (and also no DirectX and no Aero). I used the instructions here to install the modded AT drivers and now my Inspiron is working perfectly.

I am slightly worried by the three unknown Base System Devices listed in Device Manager but as everyhgting seems to work and prepared to ingnore them!

My Dell Inspiron has 1.66mgz processor and 2gb Ram and so far with Windows 7 it flies.

By: Linton

Linton — Thu, 28 Jan 2010 07:42:39 +0000

I use the TCL T-51 laptop,yestarday I installed the Win7, other drivers are all right,except the video driver,it is only 1024*768,feeling is not good,I found some drivers of ATI, but after the driver installed, then restart the laptop,the screen turn blue and full of write letters looks like it is damaged.
So would you please tel me how to deal with?

By: zota

zota — Mon, 11 Jan 2010 15:57:21 +0000

the catalyst works but i can’t install the driver
“try to setup your display adapter with a standard VGA driver before running setup”
why?

By: Herb Segars

Herb Segars — Sun, 01 Nov 2009 20:22:18 +0000

I followed the instructions on http://www.driverheaven.net/modtool.php. I downloaded and installed the mod tool. I then downloaded the ATI drivers for Vista 32 at http://support.amd.com/us/gpudownload/windows/Legacy/Pages/radeonaiw_vista32.aspx?type=2.4.1&product=2.4.1.3.7&lang=English. When I downloaded them, I let them extract to a directory but did not install them. I then ran the mod tool. After that completed, I went into the folder that contained the ATI drivers and ran setup.exe. Once it finished, I rebooted and all is well.

By: Nemiah

Nemiah — Sun, 01 Nov 2009 17:48:54 +0000

I am having the same issue… A Dell Inspiron 6400 with an X1300 and the Windows 7 upgrade.

I tried the site you reference but I am not able to find “Windows 7″ catalyst for it.

I tried doing the latest Vista 32 bit but with no success. What did you do?